| |
| |
CPU |
| |
| |
Supports 64-bit AMDฎ Athlon 64FX/64 processor
(Socket 939) |
| |
Supports 3000+, 3200+, 3500+, 3800+, 4000+, FX53 and
FX55
|
|
| |
|
| Chipset |
| |
| NVIDIA ฎ
nForce4 Chipset |
| - |
HyperTransport link to the AMD Athlon
64/Athlon 64FX CPU
|
| - |
HyperTransport supporting speed up to 1GHz
(2000MT/s) |
| - |
Supports PCI Express X16/X4/X1 interface |
| - |
Two independent SATA controllers, for four drives
|
| - |
IEEE 802.3 NVIDIA MAC for 1000BASE-T |
| - |
Dual Fast ATA-133 IDE controllers |
|
| |
|
| Main Memory |
| |
| |
Supports dual channel DDR 266/333/400, using four
184-pin DDR DIMMs.
|
| |
Supports the memory size up to 4GB |
| |
Supports 2.5v DDR SDRAM DIMM |
Due to the High Performance Memory
design, motherboards or system configurations may or may
not operate smoothly at the JEDEC (Joint Electron Device
Engineering Council) standard settings (BIOS Default on
the motherboard) such as DDR voltage, memory speeds and
memory timing. Please confirm and adjust your memory
setting in the BIOS accordingly for better system
stability.
Example: Kingston HyperX DDR500 PC4000 operates
at 2.65V, 3-4-4-8, CL=3.
For more information about specification of high
performance memory modules, please check with your
Memory Manufactures for more details. |
|
| |
|
| |
DIMM Module Combination
|
| |
Install at least one DIMM module on the
slots. Each DIMM slot supports up to a maximum size of 1GB.
Users can install either single- or double-sided modules to meet
their own needs. Please note that each DIMM can work
respectively for singlechannel DDR, but there are some rules
while using dual-channel DDR (Please refer to the suggested DDR
population table below). Users may install memory modules of
different type and density on different-channel DDR DIMMs.
However, the same type and density memory modules are necessary
while using dual-channel DDR, or instability may happen. Please
refer to the following table for detailed dual-channel DDR.
Other combination not listed below will function as
single-channel DDR. |
| |
|
Green DIMM1 (Ch A)
|
Purple DIMM2 (Ch B)
|
Green DIMM3 (Ch A)
|
Purple DIMM4 (Ch B)
|
System Density
|
|
128MB ~ 1GB
|
128MB ~ 1GB
|
-
|
-
|
256MB ~ 2GB
|
|
-
|
-
|
128MB ~ 1GB
|
128MB ~ 1GB
|
256MB ~ 2GB
|
|
128MB ~ 1GB
|
128MB ~ 1GB
|
128MB ~ 1GB
|
128MB ~ 1GB
|
512MB ~ 4GB
|
|
| |
MSI
Reminds You... |
| |
| |
Dual-channel DDR works ONLY in
the 3 combinations listed in the table shown above. |
| |
Please select the identical
memory modules to install on the dual channel, and DO
NOT install three memory modules on three DIMMs, or it
may cause some failures. |
| |
Always insert the memory
modules into the GREEN slots first, and it is strongly
recommended not to insert the memory modules into the
PURPLE slots while the GREEN slots are left empty.
|
| |
This mainboard DO NOT support
the memory module installed with more than 18 pieces of
IC (integrated circuit). |
| |
The Maximum memory speed
decreases when the following two memory combination is
selected:
- Each channel is installed with two double-sided memory
module
- Both DIMM1 and DIMM3 are installed with double-sided
memory module |
| |
Due to the South Bridge
resource deployment, the system density will only be
detected up to 3+ GB (not full 4GB) when each DIMM is
installed with an 1GB memory module |
|
| |
Recommended Memory Combination
List |
| |
|
DIMM Slots
|
Max Speed
|
|
Green
|
Purple
|
Green
|
Purple
|
|
DIMM1
|
DIMM2
|
DIMM3
|
DIMM4
|
|
S
|
-
|
-
|
-
|
DDR 400
|
|
-
|
-
|
S
|
-
|
DDR 400
|
|
D
|
-
|
-
|
-
|
DDR 400
|
|
-
|
-
|
D
|
-
|
DDR 400
|
|
S
|
-
|
S
|
-
|
DDR 400
|
|
D
|
-
|
D
|
-
|
DDR 333
|
|
S
|
S
|
-
|
-
|
DDR 400
|
|
-
|
-
|
S
|
S
|
DDR 400
|
|
D
|
D
|
-
|
-
|
DDR 400
|
|
-
|
-
|
D
|
D
|
DDR 400
|
|
S
|
S
|
S
|
S
|
DDR 400
|
|
D
|
D
|
D
|
D
|
DDR 333
|
S: Single Side
D: Double Side
|
|
| |
|
| Slots |
| |
| |
One PCI Express X16 slot (supports PCI Express Bus
specification v1.0a compliant) |
| |
One PCI Express X4 slot (supports PCI Express Bus
specification v1.0a compliant) |
| |
One PCI Express X1 slot (supports PCI Express Bus
specification v1.0a compliant) |
| |
Four 32-bit Master PCI Bus slots, one orange slot
reserves as communication slot. |
| |
Support 3.3V/5V PCI bus Interface |
|
| |
|
| On-Board IDE/SATA |
| |
| |
An IDE controller on the nVIDIA
nForce4 chipset provides IDE HDD/CD-ROM with PIO, Bus
Master and Ultra DMA133/100/66 operation modes.
|
| - |
Can connect up to 4 IDE devices
|
| |
NV RAID supports 4 SATA ports
(SATA1-4). Transfer rate is up to 150MB/s. |
| |
NV RAID (Software) |
| - |
Supports up to 4 SATA plus 2 ATA
133 Hard drives
|
| - |
RAID 0 or 1, 0+1, JBOD is
supported |
| - |
RAID function work w/ ATA 133 +
SATA H/D or 2 SATA H/D
|
|
| |
|
| BIOS |
| |
| |
The mainboard BIOS provides
"Plug & Play" BIOS which detects the peripheral devices
and expansion cards of the board automatically.
|
| |
The mainboard provides a Desktop
Management Interface (DMI) function which records your
mainboard specifications. |
| |
Supports boot from LAN, USB
Device 1.1 & 2.0 and SATA HDD |
|
| |
|
| Audio |
| |
| |
7.1 channel audio codec RealTek ALC850 |
| - |
Compliance with AC97 v2.3 Spec. |
| - |
Meet PC2001 audio performance requirement.
|
|
| |
|
| LAN |
| |
| |
Suppor LAN jacks |
| - |
1 LAN supports 10/100/1000 Fast Ethernet by Marvell
88E1111 PHY
|
|
| |
|
| On-Board Peripherals |
| |
| - |
1 floppy port supports 1 FDD with 360K, 720K, 1.2M,
1.44M and 2.88Mbytes
|
| - |
1 serial port |
| - |
1 parallel port supports SPP/EPP/ECP mode |
| - |
1 audio jack (5-in-1), coaxial/fibre SPDIF out |
| - |
10 USB 2.0 ports (Rear x 4 / Front x 6) |
| - |
1 RJ45 LAN jack |
|
| |
|
| Dimension |
| |
11.96 in (L) x 9.61 in(W) ATX Form
Factor |
| |
|
| Mounting |
| |
9 mounting holes |
After selecting item(s) with "Add To Order", click
on Review & Checkout to review or process your order.